• SHOE GOO made in the USA

  FARMERS or hard core trampers this is the stuff for you!
  

  The best product for protecting sewing! Or as a buffer in abrasion places on leather such as toe area. It will perform the same job as a rubber buffer cap, this stuff is amazing.

  While walking, sticks, stones, rough gators, climbing and crampon straps are some examples of why you need this.

  Clean leather surface of dirt, oil and wax (Warm water and brush, meths on cloth). Surface must be dry before applying Shoe Goo.

• Attach an ALLHone Shoe Goo seam nozzle onto the tube's thread
• Clean the area where the adhesive will be applied using a cloth wet with solvent; shellite, Fuelite, turps, meths and rub clean to remove wax and grease
• Allow time to evaporate
  
• While the boots are laying on a table squeeze the tube and roll the end up during use and apply a bead Of SHOO GOO covering the upward facing sewing
• Allow it to settle in and it dries firm in half hour so you can rotate the next lot of sewing upward for the next application.

Can also be used to repair PU mid-soles and on gumboots if they get a hole. Not excluding a myriad of other uses around the home.

Allow to go hard for a day then use.