ALLHONE 123 ARROW SAW SYSTEM.

All designed and made in New Zealand.

Replaces three arrow tools;

1/ check arrow shafts for true tolerance by rotating in the cradles and sort accordingly

2/ cut arrows

3/ sand cut end @ 90 degrees.

Friction force retains three arrow cradles along the aluminum rectangular tube and a respective screw provides adjustment  maintaining alignment position during cutting.

Three aligned cradles provide supporting points of contact reducing arrow flex to produce a more precise cut.

As the dremel type saw cutting discs wears down the user skilled in the art re-aligns the arrow cradles at a new cutting position so the arrow end is cut at 90 degrees and the full radius length of the disc is able to be used as it gradually wears down from cutting erosion.

The arrow cradles are also able to be used to check and sort for straight arrow shaft tolerances by rotating the shaft while held in the respective cradles and gauging the arrow's end movement.

The end cradle includes a slot for holding a piece of sanding material/ sand paper for creating a perfect 90 degree arrow end by rotating the arrow shaft in contact with the abrasive surface until a perfect 90 degree end is produced.

The arrow end may also be finished by orientating the arrow end in contact with the cutting disc flat surface while the motor is running to lightly abrade and smooth the end to 90 degrees.

Further advantages of the versatile 123 ALLHone saw system are a dremel type saw is mounted as illustrated by images showing the Ozito saw in situ and clamped and is also easily detachable so the saw is available for many other engineering duties instead of compared to other arrow saws whereby the saw motor is unusable for other work.

The 123 ARROW saw clamp has one 5mm hole throughout opposing feet and is able to be screwed or clamped down onto a bench and conveniently used for other work.

The parts are precisely slidably arranged upon a 30mm by 20mm rectangular aluminium tube that is supplied with.

The middle cradle bases are higher than the end supports so they are slidable.

Ozito saw motor not supplied is available at many builder and tool suppliers for less than $100 with accessories.